SIST EN 12735-1:2002/A1:2005

SLOVENSKI STANDARD
SIST EN 12735-1:2002/A1:2005
01-junij-2005
Baker in bakrove zlitine - Nevarjene okrogle bakrene cevi za hladilno in klimatsko
tehniko - 1. del: Cevi za napeljave
Copper and copper alloys - Seamless, round copper tubes for air conditioning and
refrigeration - Part 1: Tubes for piping systems
Kupfer und Kupferlegierungen - Nahtlose Rundrohre aus Kupfer für die Kälte- und
Klimatechnik - Teil 1: Rohre für Leitungssysteme
Cuivre et alliages de cuivre - Tubes ronds sans soudure en cuivre pour l'air conditionné
et la réfrigération - Partie 1 : Tubes pour canalisations
Ta slovenski standard je istoveten z: EN 12735-1:2001/A1:2005
ICS:
23.040.15
SIST EN 12735-1:2002/A1:2005 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 12735-1:2001/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2005
ICS 23.040.15
English version
Copper and copper alloys - Seamless, round copper tubes for
air conditioning and refrigeration - Part 1: Tubes for piping
systems
Cuivre et alliages de cuivre - Tubes ronds sans soudure en Kupfer und Kupferlegierungen - Nahtlose Rundrohre aus
cuivre pour l'air conditionné et la réfrigération - Partie 1 : Kupfer für die Kälte- und Klimatechnik - Teil 1: Rohre für
Tubes pour canalisations Leitungssysteme
This amendment A1 modifies the European Standard EN 12735-1:2001; it was approved by CEN on 24 February 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the Central Secretariat or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12735-1:2001/A1:2005: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN 12735-1:2001/A1:2005 (E)
Contents
Page
Foreword.3
1 Modification to the Foreword .4
2 Modification to Clause 5 .4
3 Modification to sub-clause 9.1 .4
4 Modification to sub-clause 9.2 .4
5 Modification to Annex ZA .4
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 97/23/EC .5

2

---------------------- Page: 3 ----------------------

EN 12735-1:2001/A1:2005 (E)
Foreword
This document (EN 12735-1:2001/A1:2005) has been prepared by Technical Committee CEN/TC 133
“Copper and copper alloys”,
...