iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
SIST

SIST EN 12255-5:2000

(Main)

Wastewater treatment plants - Part 5: Lagooning processes

Wastewater treatment plants - Part 5: Lagooning processes

This European Standard specifies the performance requirements for the installation of lagooning processes. This part applies to wastewater lagooning processes treating municipal wastewater from combined or separate sewerage systems and when used as a tertiary treatment. Note: Lagooning processes are especially suitable for treatment of wastewater where large variations in flow are experienced (e.g. resulting from stormwater).

Kläranlagen - Teil 5: Abwasserbehandlung in Teichen

Diese Europäische Norm legt die Ausführungsanforderungen für den Bau von Abwasserteichanlagen fest. Sie bezieht sich auf Abwasserteiche zur Reinigung von kommunalen Abwasser aus Misch- oder Trennsystemen sowie auf Teichanlagen zur weitergehenden Reinigung. Anmerkung: Teichanlagen sind besonders dort zur Abwasserreinigung zweckmäßig, wo starke Zuflußschwankungen zu erwarten sind (z.B. aus Niederschlagswasser).

Stations d'épuration - Partie 5: Lagunage

Cette Norme Européenne présente les prescriptions applicables a l'installation de procédés de lagunage. Cette partie concerne les procédés de lagunage utilisés pour l'épuration des eaux usées municipales provenant de systemes d'assainissement unitaires ou séparatifs ainsi que lorsqu'ils constituent un traitement tertiaire. Note: Les procédés de lagunage sont spécialement adaptés au traitement des eaux usées subissant d'importantes variations de débit (résultant des eaux de pluviales, par exemple).

Čistilne naprave za odpadno vodo - 5. del: Lagunski postopki

General Information

Status
Withdrawn
Publication Date
31-Oct-2000
Withdrawal Date
10-Apr-2024
ICS
13.060.30 - Sewage water
Technical Committee
IOVO - Water supply and waste water engineering
Current Stage
9900 - Withdrawal (Adopted Project)
Start Date
09-Apr-2024
Due Date
02-May-2024
Completion Date
11-Apr-2024
Directive
93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
Mandate
M/BC/CEN/88/15 - Standardization request to CEN/CENELEC in the field of Water supply, drainage and sewerage
Ref Project
EN 12255-5:1999 - Wastewater treatment plants - Part 5: Lagooning processes

Relations

Revised
SIST EN 12255-5:2024 - Wastewater treatment plants - Part 5: Lagooning processes
Effective Date
04-Apr-2018

Buy Standard

EN 12255-5:2000EN 12255-5:2000
PreviousNext
Standard
EN 12255-5:2000
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kläranlagen - Teil 5: Abwasserbehandlung in TeichenStations d'épuration - Partie 5: LagunageWastewater treatment plants - Part 5: Lagooning processes13.060.30Odpadna vodaSewage waterICS:Ta slovenski standard je
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

SIST
SIST EN 12255-3:2024(Main)
Wastewater treatment plants - Part 3: Preliminary treatment
EN 12255-3:2024

This document specifies design principles and performance requirements for preliminary wastewater treatment using screens with a mesh size above 50 microns, at plants serving more than 50 PT.
NOTE 1   For micro-screens with a mesh size below 50 microns see EN 12255-16.
NOTE 2   The primary application of this document is for wastewater treatment plants designed for the treatment of domestic and municipal wastewater. However, it contains information that may also be useful for commercial and industrial wastewater pretreatment and for combined sewer overflows (CSO).
This document applies in combination with EN 12255-1 and EN 12255-10.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12255-9:2024(Main)
Wastewater treatment plants - Part 9: Odour control and ventilation
EN 12255-9:2023

This document specifies design principles and performance requirements for odour control and associated ventilation for wastewater treatment plants serving more than 50PT.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12255-14:2023(Main)
Wastewater treatment plants - Part 14: Disinfection
EN 12255-14:2023

This document specifies design principles and performance requirements for disinfection of effluents (excluding sludge) at wastewater treatment plants serving more than 50 PT.
NOTE   Sludge disinfection is described in EN 12255-8.

  • Standard
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12255-13:2023(Main)
Wastewater treatment plants - Part 13: Chemical treatment - Treatment of wastewater by precipitation/flocculation
EN 12255-13:2023

This document specifies the requirements for chemical treatment of wastewater by precipitation/flocculation for removal of phosphorus and suspended solids.
The application of polymers is not described in this document.
Differences in wastewater treatment throughout Europe have led to a variety of practices being developed. This document gives fundamental information about the practices; this standard has not attempted to specify all available practices.
NOTE Chemical treatment can be performed in combination with primary and more commonly with secondary treatment, but it can also be performed as separate tertiary treatment, usually in combination with filtration (see EN 12255-16). Chemical treatment can provide a potential contribution to the circular economy through the recovery of materials, such as phosphorus, from wastewater or sludge.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12255-6:2023(Main)
Wastewater treatment plants - Part 6: Activated sludge process
EN 12255-6:2023

This document specifies performance requirements for treatment of wastewater using the activated sludge process for plants over 50 PT.
A variety of activated sludge systems has been developed. This document has not attempted to specify all available systems. This document provides fundamental information about single stage systems.
The informative Annexes A, B and C provide design information.

  • Standard
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12255-4:2023(Main)
Wastewater treatment plants - Part 4: Primary treatment
EN 12255-4:2023

This document specifies the design requirements for plant and equipment to remove solids, other than screenings and grit, from raw wastewater, at wastewater treatment plants for over 50 PT.
It includes primary treatment with sedimentation, fine screens and micro-screens
NOTE 1   The removal of screenings and grit, are covered in EN 12255, Part 3.
NOTE 2   Dissolved air flotation (DAF) is not covered in detail in this document because it is not commonly used for primary treatment in municipal wastewater treatment plants. It may be used for primary treatment of industrial wastewater, but then the design is specific to the application.

  • Standard
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12255-10:2023(Main)
Wastewater treatment plants - Part 10: Safety principles
EN 12255-10:2023

This document defines minimum safety requirements to be observed in the planning, construction or reconstruction of wastewater treatment plants.
The purpose of this document is to ensure the protection of people.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12255-11:2023(Main)
Wastewater treatment plants - Part 11: General data required
EN 12255-11:2023

This document specifies data which is necessary for the planning, design, bidding, performance guarantees, construction, start-up and compliance testing of a wastewater treatment plant or parts of it. Differences in wastewater treatment throughout Europe have led to a variety of practices being developed. This document gives fundamental information about the practices; this document has not attempted to specify all available practices.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 476:2022(Main)
General requirements for components used in drains and sewers
EN 476:2022

This document specifies general requirements to be respected in product standards for components such as pipes, fittings, inspection chambers and manholes with their respective joints intended for use in drains and sewers inside and outside buildings which operate as gravity systems allowing for a maximum pressure of 40 kPa.
It also specifies general requirements for components used in hydraulically and pneumatically pressurized discharge pipes, drains and sewers.
NOTE 1   Where the term "inside buildings" is used in the context of components fixed inside buildings, it also includes discharge pipes and fittings fixed on external surfaces of buildings
NOTE 2   This document is not a product standard and therefore not intended for the direct evaluation of products.
This document covers components to be used in conveying in a satisfactory manner:
-   domestic wastewater;
-   rainwater and surface water; and
-   other waste waters acceptable for discharge into the system (e.g. industrial wastewater).
This document applies to components of circular and other cross sections.
This document applies equally to components which are factory-made and to those constructed on site, where applicable.
NOTE 3   This document does not apply to components used for trenchless construction according to EN 14457 and for components used for renovation of drains and sewers according to EN 13380.
This document does not supersede the functional requirements of a complete system as defined in EN 752.

  • Standard
    30 pages
    English language
    sale 10% off
    e-Library read for
    1 day
SIST
SIST EN 12255-16:2021(Main)
Wastewater treatment plants - Part 16: Physical (mechanical) filtration
EN 12255-16:2021

This European Standard specifies design principles and performance requirements for tertiary clarification (receiving effluent from secondary treatment) by physical filtration plant at wastewater treatment plants serving more than 50 PT.
NOTE 1     Ultrafiltration, nanofiltration and reverse osmosis are not covered within the scope of this standard as they are not considered to be used for tertiary clarification.
NOTE 2     Soil filtration is not covered in this standard.
NOTE 3     Activated carbon filtration is excluded from the scope of this standard as it is not considered to be a form of mechanical filtration.

  • Standard
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day