Domov
Košarica
Prijava
|
Kontakti
|
Pomoč
|
English
Domov
Dobrodošli
Podatki za naročanje in dostavo
Pogosto zastavljena vprašanja
Katalog
Iskanje po ICS
Iskanje po TC
Iskanje po ključnih besedah
Napredno iskanje
SIST-V CLC Guide 29:2009
Oznaka standarda:
SIST-V CLC Guide 29:2009
Koda projekta:
16863
Organizacija:
SIST
Naslov (angleški):
Temperatures of hot surfaces likely to be touched -- Guidance document for Technical Committees and manufacturers
Naslov (slovenski):
Temperature vročih površin, kjer lahko pride do dotika - Vodila za tehnične odbore in proizvajalce
Če kupite standardizacijski dokument v .pdf formatu prek spletne prodaje, vam nudimo 20% popust pri spodnji ceni brez DDV.
Cenik SIST
Dokumenti
Ime
Jezik
Status
Cena
Dodaj v košarico
SIST-V CLC Guide 29:2009
angleški jezik
Active
SIST-F: 65.34 EUR
PDF
SIST-V CLC Guide 29:2009
Dodali ste izdelek v košarico
Nadaljuj z nakupom
K blagajni
Papir
SIST-V CLC Guide 29:2009
Dodali ste izdelek v košarico
Nadaljuj z nakupom
K blagajni
Tehnični odbor:
I15 - Tehnični odbor CLC
ICS:
01.120
13.180
Status:
Objavljen
Objavljen:
01-Feb-2009
Refer. št. objave:
Sporočila 2009-02
Referenčna oznaka:
CLC Guide 29:2007
Področje projekta (angleško):
This document provides guidance for assessing the risk of a burn from unintentional contact with readily accessible surfaces of electrical equipment under the scope of the Low Voltage Directive. This document establishes surface temperature limits, where such limits are required, and describes the maximum contact periods with a hot surface that a person may be subjected to without being exposed to a risk of burn. Curves of maximum temperatures versus contact times are described for different types of material with different types of surfaces. This document does not address temperature limits for hot functional surfaces. This document applies to surfaces of products likely to be touched by any person. The limit values may be taken into consideration by Technical Committees in determining surface temperature limits in product standards. Manufacturers may also use the limit values to assist in their risk assessment, if a product standard is not applied. It is not within the scope of this document to set temperature limits for the following zones or surfaces: - hot functional surfaces; - adjacent surfaces; - handles, control knobs including keypads, keyboards and the like; - surfaces not likely to be touched.
Najbolje prodajani standardi
SIST EN ISO 9001:2015 prevod
Sistemi vodenja kakovosti - Zahteve (ISO 9001:2015)
SIST ISO/IEC 27001:2013 prevod
Informacijska tehnologija - Varnostne tehnike - Sistemi upravljanja informacijske varnosti – Zahteve
SIST EN ISO 12100:2011 prevod
Varnost strojev - Splošna načela načrtovanja - Ocena tveganja in zmanjšanje tveganja (ISO 12100:2010)