Cellular plastics and rubbers - Determination of apparent density (ISO 845:2006)

This International Standard specifies a method of determining a) the compressive strength and corresponding relative deformation or b) the compressive stress at 10 % relative deformation and c) when desired, the compressive modulus of rigid cellular plastics.

Schaumstoffe aus Kautschuk und Kunststoffen - Bestimmung der Rohdichte (ISO 845:2006)

Diese Internationale Norm beschreibt ein Verfahren zur Bestimmung der Stoffdichte und der Materialdichte von Schaumstoffen aus Kunststoffen und Kautschuk.
Falls an dem zu prüfenden Material eine beim Formen/Extrudieren gebildete Schmelzhaut vorhanden ist, kann/können die Stoffdichte und/oder die Materialdichte bestimmt werden. Falls das Material keine Schmelz¬haut aufweist, darf die Benennung „"Stoffdichte“" nicht verwendet werden.
Für umgeformte Materialien darf ein anderes Verfahren angewendet werden, z. B. das Auftriebsverfahren.

Caoutchoucs et plastiques alvéolaires - Détermination de la masse volumique apparente (ISO 845:2006)

L'ISO 845:2006 spécifie une méthode pour la détermination de la masse volumique globale et de la masse volumique apparente de la partie intérieure («âme») des caoutchoucs et des plastiques alvéolaires.
Si le matériau soumis à essai comprend des peaux formées en cours de moulage ou d'extrusion, on peut déterminer la masse volumique apparente globale ou la masse volumique de l'âme, ou les deux. Si le matériau ne comporte pas de peaux formées pendant le moulage ou l'extrusion, le terme «masse volumique globale» n'est pas applicable.

Penjeni polimerni materiali in gume - Določevanje navidezne gostote (ISO 845:2006)

General Information

Status
Published
Publication Date
01-Sep-2009
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
02-Sep-2009
Due Date
07-Nov-2009
Completion Date
02-Sep-2009

Relations

Buy Standard

Standard
EN ISO 845:2009
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schaumstoffe aus Kautschuk und Kunststoffen - Bestimmung der Rohdichte (ISO 845:2006)Caoutchoucs et plastiques alvéolaires - Détermination de la masse volumique apparente (ISO 845:2006)Cellular plastics and rubbers - Determination of apparent density (ISO 845:2006)83.100Penjeni polimeriCellular materialsICS:Ta slovenski standard je istoveten z:EN ISO 845:2009SIST EN ISO 845:2009en,fr,de01-oktober-2009SIST EN ISO 845:2009SLOVENSKI
STANDARDSIST EN ISO 845:19991DGRPHãþD



SIST EN ISO 845:2009



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 845June 2009ICS 83.100Supersedes EN ISO 845:1995
English VersionCellular plastics and rubbers - Determination of apparent density(ISO 845:2006)Caoutchoucs et plastiques alvéolaires - Détermination de lamasse volumique apparente (ISO 845:2006)Schaumstoffe aus Kautschuk und Kunststoffen -Bestimmung der Rohdichte (ISO 845:2006)This European Standard was approved by CEN on 30 May 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN ISO 845:2009: ESIST EN ISO 845:2009



EN ISO 845:2009 (E) 2 Contents Page Foreword .3 SIST EN ISO 845:2009



EN ISO 845:2009 (E) 3 Foreword The text of ISO 845:2006 has been prepared by Technical Committee ISO/TC 61 “Plastics” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 845:2009 by Technical Committee CEN/TC 249 “Plastics” the secretariat of which is held by NBN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2009, and conflicting national standards shall be withdrawn at the latest by December 2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 845:1995. According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 845:2006 has been approved by CEN as a EN ISO 845:2009 without any modification.
SIST EN ISO 845:2009



SIST EN ISO 845:2009



Reference numberISO 845:2006(E)© ISO 2006
INTERNATIONAL STANDARD ISO845Third edition2006-12-01Cellular plastics and rubbers — Determination of apparent density Caoutchoucs et plastiques alvéolaires — Détermination de la masse volumique apparente
SIST EN ISO 845:2009



ISO 845:2006(E) PDF disclaimer This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat accepts no liability in this area. Adobe is a trademark of Adobe Systems Incorporated. Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
©
ISO 2006 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body in the country of the requester. ISO copyright office Case postale 56 • CH-1211 Geneva 20 Tel.
+ 41 22 749 01 11 Fax
+ 41 22 749 09 47 E-mail
copyright@iso.org Web
www.iso.org Published in Switzerland
ii
© ISO 2006 – All rights reserved
SIST EN ISO 845:2009



ISO 845:2006(E) © ISO 2006 – All rights reserved
iiiContents Page Foreword.iv 1 Scope.1 2 Normative references.1 3 Terms and definitions.1 4 Apparatus.1 5 Test specimens.2 5.1 Dimensions.2 5.2 Number of test specimens.2 5.3 Conditioning.2 6 Procedure.2 7 Expression of results.3 8 Accuracy.3 9 Test report.4
SIST EN ISO 845:2009



ISO 845:2006(E) iv
© ISO 2006 – All rights reserved Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each mem
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.