Resilient floor coverings - Cork floor tiles - Specification

This document specifies the requirements for cork floor coverings made from agglomerated composition cork, with or without a decorative surface layer, with or without applied colours, supplied in tile form which are designed to be used with a factory finish and/or an in situ finish.
The cork floor decorative surface layer can be made of cork or other bio-based decorative materials, e.g. wood or bamboo veneers, linoleum, leather or natural fibres.
This document includes a classification system based on intensity of use which shows where cork floor tiles with a factory finish can give satisfactory service (see EN ISO 10874). It also specifies requirements for marking, labelling and packing.

Elastische Bodenbeläge - Presskorkplatten - Spezifikation

Dieses Dokument legt Anforderungen an Korkbodenbeläge aus Presskork - mit oder ohne dekorative Deckschicht, mit oder ohne Einfärbungen - fest, die in Form von Platten geliefert werden und zur Verwendung mit einem Oberflächenfinish und/oder einer Versiegelung vorgesehen sind.
Die dekorative Deckschicht der Korkbodenbeläge kann aus Kork oder anderen biobasierten dekorativen Werkstoffen wie z. B. Holz- oder Bambusfurnieren, Linoleum, Leder oder Naturfasern bestehen.
Dieses Dokument enthält ein Klassifizierungssystem, das auf Basis der Nutzungsintensität zeigt, wo Bodenbeläge aus Presskork mit Oberflächenfinish einen zufriedenstellenden Nutzen liefern können (siehe EN ISO 10874). Es legt auch Anforderungen an die Kennzeichnung, Etikettierung und Verpackung fest.

Revêtements de sols résilients - Dalles en liège - Spécification

No Scope Available

Netekstilne talne obloge - Talne obloge iz plute - Specifikacija

Ta dokument določa zahteve za talne obloge iz plute, izdelane iz aglomerirane sestave plute z dekorativnim površinskim slojem ali brez njega, z naneseno barvo ali brez nje, ki je na voljo v obliki ploščic, namenjenih za tovarniško končno obdelavo in/ali končno obdelavo na mestu uporabe.
Dekorativne talne obloge iz plute so lahko izdelane iz plute ali drugih dekorativnih materialov na biološki osnovi, npr. lesni ali bambusov furnir, linolej, usnje ali naravna vlakna.
Ta dokument vsebuje sistem razvrščanja na podlagi intenzivnosti uporabe, ki kaže, kje bi se talne obloge iz plute s tovarniškim zaključkom lahko zadovoljivo uporabljale (glej standard EN ISO 10874). Določa tudi zahteve za označevanje, etiketiranje in pakiranje.

General Information

Status
Published
Public Enquiry End Date
04-Oct-2022
Publication Date
01-Jun-2023
Current Stage
6060 - National Implementation/Publication (Adopted Project)
Start Date
25-May-2023
Due Date
30-Jul-2023
Completion Date
02-Jun-2023

Relations

Buy Standard

Standard
EN 12104:2023
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN 12104:2022
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12104:2023
01-julij-2023
Netekstilne talne obloge - Talne obloge iz plute - Specifikacija
Resilient floor coverings - Cork floor tiles - Specification
Elastische Bodenbeläge - Presskorkplatten - Spezifikation
Revêtements de sols résilients - Dalles en liège - Spécification
Ta slovenski standard je istoveten z: EN 12104:2023
ICS:
79.100 Pluta in izdelki iz plute Cork and cork products
97.150 Talne obloge Floor coverings
SIST EN 12104:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 12104:2023

---------------------- Page: 2 ----------------------
SIST EN 12104:2023


EN 12104
EUROPEAN STANDARD

NORME EUROPÉENNE

May 2023
EUROPÄISCHE NORM
ICS 79.100; 97.150 Supersedes EN 12104:2018
English Version

Resilient floor coverings - Cork floor tiles - Specification
Revêtements de sol résilients - Dalles en liège - Elastische Bodenbeläge - Presskorkplatten -
Spécification Spezifikation
This European Standard was approved by CEN on 28 February 2023.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12104:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN 12104:2023
EN 12104:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Requirements . 5
4.1 General requirements . 5
4.2 Classification requirements . 5
5 Marking, labelling and packing . 7
Annex A (informative) Optional properties . 8
Annex B (informative) Supplementary information . 9
Bibliography .10

2

---------------------- Page: 4 ----------------------
SIST EN 12104:2023
EN 12104:2023 (E)
European foreword
This document (EN 12104:2023) has been prepared by Technical Committee CEN/TC 134 “Resilient,
textile, laminate and modular mechanical locked floor coverings”, the secretariat of which is held by NBN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2023, and conflicting national standards shall
be withdrawn at the latest by November 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 12104:2018.
The main changes compared to the previous edition are listed below:
— Scope review.
— Normative references.
— General requirements:
1) Dimensional stability requirement and test method.
— Classification requirements:
1) Residual indentation requirements review based on apparent density value.
2) Effect of Castor chair requirements review, surface type notes and test method update.
3) Wear resistance eliminate option EN 13329:2016+A1:2017, Annex E, and requirements review
for varnish surfaces.
— Optional Properties review.
— Bibliography update.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North
Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the United
Kingdom.
3

---------------------- Page: 5 ----------------------
SIST EN 12104:2023
EN 12104:2023 (E)
1 Scope
This document specifies the requirements for cork floor coverings made from agglomerated composition
cork, with or without a decorative surface layer, with or without applied colours, supplied in tile form
which are designed to be used with a factory finish and/or an in situ finish.
The cork floor decorative surface layer can be made of cork or other bio-based decorative materials, e.g.
wood or bamboo veneers, linoleum, leather or natural fibres.
This document includes a classification system based on intensity of use which shows where cork floor
tiles with a factory finish can give satisfactory service (see EN ISO 10874). It also specifies requirements
for marking, labelling and packing.
2 Normative references
The following documents are referred to in th
...

SLOVENSKI STANDARD
oSIST prEN 12104:2022
01-september-2022
Netekstilne talne obloge - Talne obloge iz plute - Specifikacija
Resilient floor coverings - Cork floor tiles - Specification
Elastische Bodenbeläge - Presskorkplatten - Spezifikation
Revêtements de sols résilients - Dalles en liège - Spécification
Ta slovenski standard je istoveten z: prEN 12104
ICS:
79.100 Pluta in izdelki iz plute Cork and cork products
97.150 Talne obloge Floor coverings
oSIST prEN 12104:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 12104:2022

---------------------- Page: 2 ----------------------
oSIST prEN 12104:2022


DRAFT
EUROPEAN STANDARD
prEN 12104
NORME EUROPÉENNE

EUROPÄISCHE NORM

July 2022
ICS 79.100; 97.150 Will supersede EN 12104:2018
English Version

Resilient floor coverings - Cork floor tiles - Specification
Revêtements de sols résilients - Dalles en liège - Elastische Bodenbeläge - Presskorkplatten -
Spécification Spezifikation
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 134.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 12104:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 12104:2022
prEN 12104:2022 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Requirements . 5
4.1 General requirements . 5
4.2 Classification requirements . 5
5 Marking, labelling and packing . 7
Annex A (informative) Optional properties . 8
Annex B (informative) Supplementary information . 9
Bibliography .10

2

---------------------- Page: 4 ----------------------
oSIST prEN 12104:2022
prEN 12104:2022 (E)
European foreword
This document (prEN 12104:2022) has been prepared by Technical Committee CEN/TC 134 “Resilient,
textile, laminate and modular mechanical locked floor coverings”, the secretariat of which is held by NBN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 12104:2018.
In comparison with the previous edition, a general review was done. The more relevant technical
modifications done were:
— Scope review.
— Normative references.
— General requirements:
1) Dimensional stability requirement and test method.
— Classification requirements:
1) Residual indentation requirements review based on apparent density value.
2) Effect of Castor chair requirements review, surface type notes and test method update.
3) Wear resistance eliminate option EN 13329:2016+A1:2017, Annex E, and requirements review
for varnish surfaces.
— Optional Properties review.
— Bibliography update.
3

---------------------- Page: 5 ----------------------
oSIST prEN 12104:2022
prEN 12104:2022 (E)
1 Scope
This document specifies the requirements for cork floor coverings made from agglomerated composition
cork, with or without a decorative surface layer, with or without applied colours, supplied in tile form
which are designed to be used with a factory finish and/or an in situ finish.
The cork floor decorative surface layer can be made of cork or other bio-based decorative materials, e.g.
wood or bamboo veneers, linoleum, leather or natural fibres.
This document includes a classification system based on intensity of use which shows where cork floor
tiles with a factory finish can give satisfactory service (see EN ISO 10874). It also specifies requirements
for marking, labelling and packing.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
EN 12466:1998, Resilient floor coverings - Vocabulary
EN 15468:2016+A.1:2021, Laminate floor coverings - Elemen
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.