SIST EN 61386-25:2012

SLOVENSKI STANDARD
SIST EN 61386-25:2012
01-januar-2012
6LVWHPLNDQDORY]DHOHNWULþQHLQãWDODFLMHGHO3RVHEQH]DKWHYH1DSUDYH]D
SULWUGLWHYNDQDORY
Conduit systems for cable management - Part 25: Particular requirements - Conduit
fixing devices
Elektroinstallationsrohrsysteme für elektrische Energie und für Informationen - Teil 25:
Besondere Anforderungen für Rohrhalter
Systèmes de conduits pour la gestion du câblage - Partie 25: Exigences particulières -
Dispositifs de fixation de conduit
Ta slovenski standard je istoveten z: EN 61386-25:2011
ICS:
29.120.10 ,QãWDODFLMVNHFHYL]D Conduits for electrical
HOHNWULþQHQDPHQH purposes
SIST EN 61386-25:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61386-25:2012

---------------------- Page: 2 ----------------------

SIST EN 61386-25:2012

EUROPEAN STANDARD
EN 61386-25

NORME EUROPÉENNE
November 2011
EUROPÄISCHE NORM

ICS 29.120.10


English version


Conduit systems for cable management -
Part 25: Particular requirements -
Conduit fixing devices
(IEC 61386-25:2011)


Systèmes de conduits pour la gestion du Elektroinstallationsrohrsysteme für
câblage - elektrische Energie und
Partie 25: Exigences particulières - für Informationen -
Dispositifs de fixation de conduit Teil 25: Besondere Anforderungen für
(CEI 61386-25:2011) Rohrhalter
(IEC 61386-25:2011)





This European Standard was approved by CENELEC on 2011-10-27. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61386-25:2011 E

---------------------- Page: 3 ----------------------

SIST EN 61386-25:2012
EN 61386-25:2011 - 2 -
Foreword
The text of document 23A/635/FDIS, future edition 1 of IEC 61386-25, prepared by SC 23A, Cable
management systems, of IEC TC 23, Electrical accessories was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN 61386-25:2011.

The following dates are fixed:
(dop) 2012-07-27
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2014-10-27
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This standard is to be used in conjunction with EN 61386-1:2008.
The clauses of the particular requirements of this Part 25 add to or modify the corresponding clauses in
Part 1. Where the text of Part 25 indicates an "addition" to or a "deletion” or a “replacement" of the
relevant requirement, test specification or explanation of Part 1, these changes are made to the relevant
text of Part 1, which then becomes part of the standard. Where no change is necessary, the words "This
clause of Part 1 is applicable" are used in Part 25. Subclauses or figures that are additional to those in
Part 1 are numbered starting from 101.

NOTE  The following print types are used:
– requirements: in roman type;
– test specifications: in italic type;
– notes: in small roman type.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.

Endorsement notice
The text of the International Standard IEC 61386-25:2011 was approved by CENELEC as a European
Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 61386-25:2012
- 3 - EN 61386-25:2011
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Addition to Annex ZA of EN 61386-1:2008:

Publication Year Title EN/HD Year

ISO 4287 - Geometrical Product Specifications (GPS) - EN ISO 4287 -
Surface texture: Profile method - Terms,
definitions and surface texture parameters

---------------------- Page: 5 ----------------------

SIST EN 61386-25:2012

---------------------- Page: 6 ----------------------

SIST EN 61386-25:2012
IEC 61386-25
®

Edition 1.0 2011-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE


Conduit systems for cable management –
Part 25: Particular requirements – Conduit fixing devices

Systèmes de conduits pour la gestion du câblage –
Partie 25: Exigences particulières – Dispositifs de fixation de conduit

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX Q
ICS 29.120.10 ISBN 978-2-88912-696-5

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 7 ----------------------

SIST EN 61386-25:2012
– 2 – 61386-25  IEC:2011
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 General requirements . 6
5 General conditions for tests . 6
6 Classification . 6
7 Marking and documentation . 7
8 Dimensions . 8
9 Construction . 8
10 Mechanical properties . 8
11 Electrical properties . 11
12 Thermal properties . 11
13 Fire hazard . 11
14 External influences . 11
15 Electromagnetic compatibility . 12
Annex A (normative) Classification coding for conduit fixing devices . 16

Figure 101 – Arrangement for lateral load test with mandrel . 13
Figure 102 – Arrangement for lateral load test with conduit . 14
Figure 103 – Arrangement for axial load test . 15

Table 2 – Upper temperature range . 7
Table 101 – Lateral load for test . 10

---------------------- Page: 8 ----------------------

SIST EN 61386-25:2012
61386-25  IEC:2011 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

CONDUIT SYSTEMS FOR CABLE MANAGEMENT –

Part 25: Particular requirements –
Conduit fixing devices


FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61386-25 has been prepared by subcommittee 23A: Cable
management systems, of IEC technical committee 23: Electrical accessories.
The text of this standard is based on the following documents:
FDIS Report on voting
23A/635/FDIS 23A/637/RVD

Full information on the voting for the approval of this standard can be found in the report on
voting indicated in the above table.
This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
This standard is to be read in conjunction with IEC 61386-1:2008, Conduit systems for cable
management – Part 1: General requirements.

---------------------- Page: 9 ----------------------

SIST EN 61386-25:2012
– 4 – 61386-25  IEC:2011
The clauses of the particular requirements of this Part 25 add to or modify the corresponding
clauses in Part 1. Where the text of Part 25 indicates an "addition" to or a "deletion” or a
“replacement" of the relevant requirement, test specification or explanation of Part 1, these
changes are made to the relevant text of Part 1, which then becomes part of the standard.
Where no change is necessary, the words "This clause of Part 1 is applicable" are used in
Part 25. Subclauses or figures that are additional to those in Part 1 are numbered starting
from 101.
NOTE The following print types are used:
– requirements: in roman type;
– test specifications: in italic type;
– notes: in small roman type.
A list of all the parts in the IEC 61386 series, under the general title Conduit systems for cable
management, can be found on the IEC website.
The committee has decided that the contents of this publication will remain unchanged until
the stability date indicated on the IEC web site under "http://webstore.iec.ch" in the data
related to the specific publication. At this date, the publication will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

---------------------- Page: 10 ----------------------

SIST EN 61386-25:2012
61386-25  IEC:2011 – 5 –
CONDUIT SYSTEMS FOR CABLE MANAGEMENT –

Part 25: Particular requirements –
Conduit fixing devices



1 Scope
This clause of Part 1 is applicable except as follows:
Replacement in the first paragraph of the words “conduit fittings” by “conduit fittings and
conduit fixing devices”.
Addition at the end of the clause:
This part of IEC 61386 specifies requirements and tests for conduit fixing devices used for
support and/or retention of conduit for cable management.
2 Normative references
This clause of Part 1 is applicable with the following exception:
Addition:
ISO 4287, Geometrical Product Specifications (GPS) – Surface texture: Profile method –
Terms, definitions and surface texture parameters
3 Terms and definitions
This cl
...