• Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    40 pages
    German language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies a test method for the micro-scratch resistance with two procedures (A and B) and a test method for polishing resistance (procedure C) which can be used for all types of laminate floor coverings. The resistance to polishing is related to mat surfaces.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

N/A

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

N/A

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies requirements for 3-strand hawser-laid and 4-strand shroud-laid ropes,
8-strand braided ropes and 12-strand braided ropes for general service made of polypropylene, and
gives rules for their designation.
This document does not cover all variations in strength or product performance. The rope manufacturer
is consulted to ensure the intended design meets the requirements of the application

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    German language
    sale 10% off
    e-Library read for
    1 day

This document specifies requirements for 3-strand hawser-laid and 4-strand shroud-laid ropes,
8-strand braided ropes and 12-strand braided ropes for general service made of polyamide, and gives
rules for their designation.
This document does not cover all variations in strength or product performance. The rope manufacturer
is consulted to ensure the intended design meets the requirements of the application

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    German language
    sale 10% off
    e-Library read for
    1 day

This document specifies requirements for 3-strand hawser-laid and 4-strand shroud-laid ropes,
8-strand braided ropes and 12-strand braided ropes for general service made of polyester, and gives
rules for their designation.
This document does not cover all variations in strength or product performance. The rope manufacturer
is consulted to ensure the intended design meets the requirements of the application.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    German language
    sale 10% off
    e-Library read for
    1 day

This document specifies a chromatographic method to determine the amount of short-chain chlorinated paraffins (SCCPs: C10-C13) and middle-chain chlorinated paraffins (MCCPs: C14-C17) in textile articles, especially in polymer of the coated fabrics, prints made of polymer and buttons made of polymer (e.g. polyvinylchloride) by means of  solvent extraction and gas chromatography negative ion chemical ionization mass spectrometry (GC-NCI-MS).

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 4918:2016 specifies methods for determining the change of appearance and stability of a textile floor covering or any damage caused by detachment of layers, opening of joints, or crazing of a resilient or laminate floor covering under the movement of a castor chair.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies index test methods for determining the compressive creep properties of
geosynthetic products. The test specimens are subjected either to normal compressive loading or to a
combination of normal compressive loading and shear loading.
The test method with a normal load only (see Clause 5) is the standard method.
The test method in which combined normal and shear loads are applied (see Clause 6) is intended for
products that are sensitive to shear failure, i.e. which have a columnar or cuspated structure.
The tests are carried out on dry specimens or on specimens immersed in water. The test is intended
to be carried out with the specimen immersed in water when any part of the geosynthetic product
contains a hydrophilic polymer.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This specific test serves to determine the protective effect of different geosynthetics against water erosion by heavy rain. The test is performed in a laboratory apparatus and the results serve as a performance test.

  • Technical specification
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical specification
    34 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a method for the determination of tear resistance of nonwovens by the
trapezoid method.
This document applies to nonwovens.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a method for the automatic determination of the deformability of textile fabrics,
including continuous-fibre reinforcement textiles. This method is not applicable to resin impregnated
fabrics.
The method is suitable for use with fabrics such as woven or knitted fabrics, nonwovens, non-crimp
fabrics, fabrics made of glass rovings or untwisted carbon filament yarns intended for reinforced
composite materials. When applying the method to multi-axial non-crimp fabrics, the evaluation of the
fibre orientation and gaps only incorporates the uppermost layer.
The method can be used for fabrics treated with powder binder.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a method, using acetone, to determine the mass percentage of acetate, after
removal of non-fibrous matter, in textiles made of mixtures of
— acetate
with
— wool, animal hair, silk, protein, cotton (scoured, kiered, or bleached), flax (or linen), hemp, jute, abaca,
alfa, coir, broom, ramie, sisal, cupro, viscose, modal, polyamide, polyester, polypropylene, acrylic,
elastolefin, elastomultiester, melamine, polypropylene/polyamide bicomponent, polyacrylate and
glass fibres.
It is not applicable to mixtures containing modacrylic fibres, certain chlorofibres, nor to mixtures
containing acetate fibres that have been deacetylated on the surface.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document provides a description of anthropometric measurements that can be used as a basis for
the creation of physical and digital anthropometric databases. The list of measurements specified in
this document is intended to serve as a guide for practitioners in the field of clothing who are required
to apply their knowledge to select population market segments and to create size and shape profiles
for the development of all garment types and their equivalent fit mannequins. The list provides a
guide for how to take anthropometric measurements, as well as give information to clothing product
development teams and fit mannequin manufacturers on the principles of measurement and their
underlying anatomical and anthropometrical bases.
Annex A describes the use of the pictogram (standardized and modified) based on the selection of most
usual body dimensions used for clothing size designation.
This document is intended to be used in conjunction with national, regional or international
regulations or agreements to ensure harmony in defining population groups and to allow comparison
of anthropometric data sets.

  • Standard
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document provides definitions in the field of “smart” textiles and textile products as well
as a categorization of different types of smart textiles. It describes briefly the current stage of
development of these products and their application potential and gives indications on preferential
standardization needs.

  • Technical report
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Technical report
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies primary and secondary dimensions for specified types of garments to be used
in combination with ISO 8559-1 (anthropometric definitions for body measurement).
The primary aim of this document is to establish a size designation system that can be used by
manufacturers and retailers to indicate to consumers (in a simple, direct and meaningful manner) the
body dimensions of the person that the garment is intended to fit. Provided that the size of the person’s
body (as indicated by the specified dimensions) has been determined in accordance with ISO 8559-1,
this designation system will facilitate the choice of garments that fit. This information can be indicated
by labelling, etc.
The size designation system is based on body measurements, not garment measurements. The choice
of garment measurements is normally determined by the designer and the manufacturers who make
appropriate allowances to accommodate the type and position of wear, style, cut and fashion elements
of the garment.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a method for the determination of the resistance to pilling, fuzzing, and
matting of textile fabrics using the random tumble pilling tester. This method is applicable to most of
woven and knitted fabrics, including napped fabrics (fleeces, inlay fabrics).
This method is not applicable to fabrics which cannot tumble freely.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a method for the determination of the resistance to pilling, fuzzing, and
matting of textile fabrics using a modified Martindale method.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a method for the visual assessment of pilling, fuzzing, and matting respectively
of textile fabrics. This method is applicable to most of woven and knitted fabrics, including napped
fabrics (fleeces, inlay fabrics).

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a method for the determination of the resistance to pilling, fuzzing, and
matting of textile fabrics using a rotating pilling box apparatus.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    5 pages
    German language
    sale 10% off
    e-Library read for
    1 day

This standard specifies a method for the determination of the microbiological resistance of geotextiles and geotextile-related products by a soil burial test. It does not specify for which products or in which applications the soil burial test is required. Further reference should be made to CR ISO 13434.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a method for determining the constant-head water flow capacity within the
plane of a geotextile or geotextile-related product. This document describes the in-plane water flow
index test, only applicable to factory-assembled products. For the in-plane water flow performance test,
see ISO 12958-2.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a method for determining the constant-head water flow capacity within the
plane of a geotextile or geotextile-related product, using boundary materials and test conditions of
interest. A standard series of test conditions are proposed, involving soil confinement, low hydraulic
gradients, seating times and an array of normal loads.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies the method and conditions of test for the determination of the breaking force
and elongation at break of individual fibres in the conditioned or wet state.
The determination of these fibre properties, when carried out on different kinds of testing equipment,
will not generally give identical results. To avoid such differences, this document is restricted to the use
of constant-rate-of-extension testing machine.
It is applicable to all fibres, including crimped fibres, provided that the length of fibre available enables
the gauge length specified in this document.
NOTE For natural fibres (especially wool and cotton), the breaking test most commonly performed is that of
bundles of fibres (see ISO 3060 and IWTO 32‑82).

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a method using hot formic acid to determine the mass percentage of melamine
fibres after removal of non-fibrous matter, in textiles made of mixtures of:
— melamine fibres
with
— cotton, polypropylene or aramid fibres.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a method, using sulfuric acid, to determine the mass percentage of silk, after
removal of non-fibrous matter, in textiles made of mixtures of
— silk
with
— wool or other animal hair.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a method, using dimethylformamide, to determine the mass percentage of
acrylic, modacrylic, chlorofibre or elastane, after removal of non-fibrous matter, in textiles made of
mixtures of
— acrylic, certain modacrylics, certain chlorofibres, certain elastane fibres
with
— wool, animal hair, silk, cotton, viscose, cupro, modal, lyocell, polyamide, polyester, polypropylene,
elastomultiester, elastolefin, melamine, polypropylene/polyamide bicomponent, polyacrylate or
glass fibres.
It is not applicable to animal hair, wool and silk dyed with chromium based mordant dyes.
NOTE Dyestuff identification is described in ISO 16373-1.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Amendment
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies test methods for determining:
a)   the vertical resistance,
b)   the resistance to earth,
c)   the surface resistance
of a resilient, laminate and modular multilayer floor covering after installation in test piece or after installation.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a method for the determination of the bursting strength of rubber or plastics
coated fabrics, using a mechanically operated steel ball.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This International Standard describes a test method for the determination of the bending force of
rubber or plastic coated textile

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This International standard specifies a method for quantitative and qualitative analysis of extractable organotin compounds without derivatization in textile and textile‐related products.
This International Standard provides a method that uses Liquid Chromatograph with Tandem Mass Spectrometer (LC/MS/MS).

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a method for the determination of the bursting strength of rubber - or plastics
- coated fabrics, using one of two types of diaphragm bursting tester, designated type A and B, both
operated by hydraulic pressure.
The type A test machine is applicable to materials having bursting strengths ranging from 350 kPa to
5 500 kPa and the type B test machine is applicable to materials of bursting strengths ranging from
70 kPa to 1 400 kPa.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day

ISO 5971:2017 establishes a system for designating the sizes of tights.
The system is based on three criteria:
- identification of dimensions;
- description of the methods of determining size designations from survey data; and
- indication of size designations for garment labelling.
Examples of size designations are given in Annex B.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    9 pages
    English language
    sale 15% off
  • Standard
    9 pages
    French language
    sale 15% off

This document specifies three permeametric methods for the determination of the fineness of flax fibres.
— Constant flow method, with two compressions, using a test piece of parallel fibres (see Clause 5);
— Simplified constant flow method, with one compression, using a test piece of fibres distributed "at random" (see Clause 6);
— Constant pressure method, with one compression, using a test piece of fibres distributed "at random" (see Clause 7).
This document is applicable to the various forms possible for flax fibres, i.e. long strands, broken strands, all kinds of tow and at all stages of manufacture of these substances.

  • Standard
    23 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    18 pages
    English language
    sale 15% off
  • Standard
    20 pages
    French language
    sale 15% off

This document specifies a qualitative and quantitative procedure to determine the composition of
animal hair fibre blends (made of wool, cashmere, yak, alpaca, camel or angora) by LC-MS without
protein reduction.
NOTE 1 The composition of non-animal hair fibres can be measured by ISO 1833 (all parts). Both results are
combined to determine the total fibre composition.
The method is based on a preliminary identification, by light microscopy, of all fibres in the blend on the
basis of their morphology, according to ISO/TR 11827[4]. It is not applicable if fibres of the same animal
species (such as blends of cashmere and mohair) are present.
NOTE 2 In this case, the quantitative analysis is performed using microscopical analysis [for example,
ISO 17751 (all parts)].

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a method using trichloroacetic acid and chloroform to determine the mass
percentage of polyester fibres after removal of non-fibrous matter, in textiles made of mixtures of
— polyester fibres
with
— aramid fibres (except polyamide imide), flame retardant (FR) viscose and polyacrylate.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a common method for the quantitative chemical analysis of various mixtures
of fibres. This method and the methods described in the other parts of ISO 1833 are applicable, in
general, to fibres in any textile form. Where certain textile forms are excepted, these are listed in the
scope of the appropriate part.

  • Standard
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies methods of quantitative analysis of various ternary mixtures of fibres.
The field of application of each method for analysing mixtures, specified in the parts of ISO 1833,
indicates the fibres to which the method is applicable.
This document is applicable to mixtures of fibres with more than three components provided that
the combination of test methods leads back to simple cases of fibre mixtures. Table B.1 illustrates the
typical ternary mixtures and their applied corresponding parts of the ISO 1833 series.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a method for determining the colour fastness and ageing properties of all kinds
and forms of dyed and printed textiles and/or other organic substrates under the action of an artificial
light source representative of natural daylight (D65), and under the simultaneous action of heat. Of the
five different sets of exposure conditions specified (see 7.1.1), four use D65, and the other one uses a
somewhat lower cut-off wavelength. The test method gives special consideration to the light and heat
conditions that occur in the interior of a motor vehicle.
The five different sets of conditions using the different optical filter systems specified can produce
different test results. Results from tests performed using different apparatus (instrument types) for the
same set of conditions and optical filter system are not comparable because comparable performance
has not been validated.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This standard specifies methods for screening the resistance of geotextile products to liquids while not subjecting them to external mechanical stress.
The standard is applicable to all geotextiles and geotextile related products.
Method A applies particularly to polyamides and method B to polyesters and polyamides. The test results should be interpreted in the context of site conditions.
NOTE This standard only considers conditions where the specimens are fully immersed in the liquids. Though outside the scope of this standard, the test conditions may be modified to accommodate particular applications, e.g. gaseous media. This standard does not preclude use for test specimens that are pre-treated by some method, e.g. by weathering, aqueous extraction conditions or installation damage.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies four methods of test for textile floor coverings (with or without an underlay,
see Clause 9) using the Lisson Tretrad machine.
— test A: determination of mass loss of textile floor coverings, also used to assess fibre bind of synthetic
pile carpets;
— test B: determination of stair nosing appearance change of textile floor coverings;
— test C: determination of fibre bind on synthetic loop pile carpets;
— test D: determination of fibre bind (hairiness) on needled floor coverings and floor coverings
without pile.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a test method for determining the presence of organotin compounds. This test
method is applicable to all types of materials of textile products.
NOTE CEN/TR 16741 defines which materials are concerned by this determination.

  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the characteristics of quartz vinyl tiles based on polyvinyl chloride binder, quartz sand as a sole or partial filler and supplied in tile form.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a method, using sulfuric acid, to determine the mass percentage of polyamide,
after removal of non-fibrous matter, in textiles made of binary mixtures of
— polyamide
with
— polypropylene/polyamide bicomponent.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies test methods for the determination of tensile properties of polymeric geosynthetic barriers (PE (PEHD and PELLD, FPO (EVA, FPP, and PEVLD), PVC-P and EPDM).
Method A is suitable for testing polymeric geosynthetic barriers (GBRP), PVC, EPDM and FPO (EVA, FPP and PEVLD), non-reinforced (including 80gsm glass fleece) and without backing.
Method B is suitable for testing polymeric geosynthetic barriers (GBRP), PE (HDPE and PELLD), non-reinforced and without backing.
Method C is suitable for testing polymeric geosynthetic barriers (GBRP), reinforced and/or with  backing.
Method D is suitable for measuring modulus (if required) of all non-reinforced products.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This document specifies a method, using diluted acetic acid, to determine the mass percentage of
chitosan fibres, after elimination of non-fibrous matter, in textiles made of mixtures of:
— chitosan fibre
with
— certain other fibres.
This method is applicable to fibre mixtures of chitosan fibre with cellulose fibres (cotton, linen, ramie,
viscose, modal, lyocell), protein fibres (wool, cashmere, silk), or synthetic fibres (polyester, polyamide,
acrylic).

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day

This European Standard specifies the characteristics of homogeneous and heterogeneous relief or studded rubber floor coverings, supplied in either tile or roll form.
This European Standard includes a classification system based on intensity of use, which shows where these resilient floor coverings should give satisfactory service (see EN 685). It also specifies requirements for marking.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day